Control Panel - Device Manager - Imaging - write down make and model of camera - double click. on it and on driver's tab get version. Now click Update Drivers (which may not do anything as MS. is far behind certifying drivers). The RIGHT CLICK on the camera - UNINSTALL - REBOOT - this. If problems persist, continue using these steps. Right-click the name of the webcam in the Images Devices category (HP Webcam-101 or Microsoft USB Video Device), and select Update Driver Software. Click Browse the computer to select a specific USB Video Device driver. Double-click Imaging Devices to expand the list of webcam drivers, right Please boot the unit to BIOS. To boot to BIOS, restart the unit and keep tapping F10. Once you are in BIOS, go to system configuration > Built in Device options > Enable Integrated Camera by check mark in the box > save the changes and exit. Now go to device manager and check if the webcam is listed under Imaging devices. Here are the steps to do so: In Device Manager, double-click the webcam. Optional: In the Driver tab, select Update Driver > Search Automatically for drivers. Alternatively, you can also update the drivers via the Logitech Software. In the Driver tab, select Update Driver > Browse my computer for driver software. Click on the "Start Update" button to begin the firmware update process. Since there are several chipsets to update in the S430c monitor, it will take a few minutes to complete the process. Please do not remove power or detach any cables during the firmware update process. 5. Once complete, a summary message will appear in the center of the Zf3o.

hp webcam not working